Used to inject dewatering polymer for aerated waste, organic waste, emulsified waste, digested waste and other sludge common to many industrial wastewater processes and municipal wastewater treatment plants.
Lowers biological oxygen demand (BOD) and chemical oxygen demand (COD) for treatment of wastewater that is returning to the plant.
A replacement or necessary step in compliance for land applying.
Uses dewatering polymer to flocculate sludge.
Can be used with dewatering flocculation chemicals such as lime, alum, and ferric sludge and slurry.
Uses 15 amp, 120 volt single-phase outlet and minimal electricity.
PM 250: Polymer tank and agitator are separate from skid, flow rates up to 100 gpm
PM 500: Polymer tank and agitator are separate from the skid, flow rates higher than 100 gpm
PM 1000: All components skid mounted
PM 2000: All components are skid mounted, including two agitated batch tanks
Standard Tank Sizes range from 30 gallons to dual 1,000 gallon tanks
Batch type mixing unit
Utilizes a mixing tank for polymer dilution and water blending
Neat liquid or dry polymer is added to the tank
An electric agitator is used for dispersing and blending the neat polymer with water
The dilute solution is then injected and thoroughly mixed with influent waste in the Mix Mate® Static Mixer that is included as part of the assembly
This produces a uniformly flocculated sludge ready to be dewatered
Used in processes including:
Grease Trap Wastewater
Portable Toilet Wastewater
Stock Animal Wastewater
Food Processing Wastewater
Liquid Waste Haulers/Hauling
Submersible pump dredging operations